This document has been archived and replaced by NSF 14-544 http://www.nsf.gov/publications/pub_summ.jsp?ods_key=nsf14544. Title: Scalable Nanomanufacturing (SNM)(nsf13545) Date: 05/20/13 Replaces: NSF 12-544 Scalable Nanomanufacturing (SNM) [1]Program Solicitation NSF 13-545 Replaces Document(s): NSF 12-544 NSF Logo National Science Foundation Directorate for Engineering Division of Electrical, Communications and Cyber Systems Division of Chemical, Bioengineering, Environmental, and Transport Systems Division of Civil, Mechanical and Manufacturing Innovation Industrial Innovation and Partnerships Directorate for Mathematical & Physical Sciences Division of Materials Research Full Proposal Deadline(s) (due by 5 p.m. proposer's local time): June 03, 2013 IMPORTANT INFORMATION AND REVISION NOTES A revised version of the NSF Proposal & Award Policies & Procedures Guide (PAPPG), [2]NSF 13-1, was issued on October 4, 2012 and is effective for proposals submitted, or due, on or after January 14, 2013. Please be advised that the guidelines contained in [3]NSF 13-1 apply to proposals submitted in response to this funding opportunity. Proposers who opt to submit prior to January 14, 2013, must also follow the guidelines contained in [4]NSF 13-1. Please be aware that significant changes have been made to the PAPPG to implement revised merit review criteria based on the National Science Board (NSB) report, [5]National Science Foundation's Merit Review Criteria: Review and Revisions. While the two merit review criteria remain unchanged (Intellectual Merit and Broader Impacts), guidance has been provided to clarify and improve the function of the criteria. Changes will affect the project summary and project description sections of proposals. Annual and final reports also will be affected. A by-chapter summary of this and other significant changes is provided at the beginning of both the [6]Grant Proposal Guide and the [7]Award & Administration Guide. Please note that this program solicitation may contain supplemental proposal preparation guidance and/or guidance that deviates from the guidelines established in the [8]Grant Proposal Guide. Revision Summary Increased emphasis on framing proposals in the context of the eventual manufacture of demonstrably useful products in high volume and at low cost. Addition of environmental considerations to Theme 5. Important Reminders Collaborative research activities must be described and submitted in a single proposal in which a single award is requested, with subawards administered by the lead organization to any other participating organizations (see [9]GPG section II.D.4.a.). Budgets for any subawards to different organizations must be included. Proposers must indicate in order of priority one (or more) of the five research and education themes described in Section II which the proposal addresses. This must be stated in the last line of the project summary, and it will be used to assist in assignment of the proposal to the most appropriate review panel. SUMMARY OF PROGRAM REQUIREMENTS General Information Program Title: Scalable Nanomanufacturing (SNM) FY 2013 Synopsis of Program: The National Science Foundation (NSF) announces a third year of a program on collaborative research and education in the area of scalable nanomanufacturing, including the long-term societal implications of the large-scale implementation of nanomanufacturing innovations. This program is in response to and is a component of the National Nanotechnology Initiative Signature Initiative: Sustainable Nanomanufacturing - Creating the Industries of the Future ([10]http://www.nano.gov/node/611). Although many nanofabrication techniques have demonstrated the ability to fabricate small quantities of nanomaterials and devices for characterization and evaluation purposes, the emphasis of this program is on research to overcome the key impediments that prevent the low cost production of useful nanomaterials, devices and systems at industrially relevant scale. Therefore, competitive proposals will incorporate three elements in their research plans: * A persuasive argument that the nanomaterials, devices or systems to be produced have or are likely to have sufficient demand to justify eventual scale-up; * A clearly identified and arguably complete set of research issues that must be addressed to enable the low cost production of high quality products; and * A compelling research plan with clear objectives to overcome the identified research issues that is supported by preliminary results relevant to scale-up. The mode of support is Nanoscale Interdisciplinary Research Teams (NIRT). Proposals submitted to this program must address at least one, and preferably more than one, of the following interconnected themes: * Novel processes and techniques for continuous and scalable nanomanufacturing; * Directed (e.g. physical/chemical/biological) self-assembly processes leading to heterogeneous nanostructures with the potential for high-rate production; * Fundamental scientific research in well-defined areas that are compellingly justified as critical impediments to scale-up; * Principles and design methods to produce machines and processes to manufacture nanoscale structures, devices and systems; and/or * Societal, environmental and educational implications of the large-scale production and use of nanomaterials, devices and systems, including the life-cycle analysis of such nanomaterials, devices and systems. Other research and education projects in nanoscale science and engineering will continue to be supported in the relevant programs and divisions. Please see requirements for submitting proposals for collaborations; a single proposal with subcontracts must be submitted for collaborations and the submission of separate proposals from multiple investigators for collaborative projects ('collaborative proposals') is not allowed. Cognizant Program Officer(s): Please note that the following information is current at the time of publishing. See program website for any updates to the points of contact. * Sumanta Acharya,ENG/CBET, telephone: (703) 292-7494, email: [11]sacharya@nsf.gov * Anupama B. Kaul,ENG/ECCS, telephone: (703) 292-8153, email: [12]akaul@nsf.gov * Bruce M. Kramer,ENG/CMMI, telephone: (703) 292-5348, email: [13]bkramer@nsf.gov * Lynnette D. Madsen,MPS/DMR, telephone: (703) 292-4936, email: [14]lmadsen@nsf.gov * Rajesh Mehta,ENG/IIP, telephone: (703) 292-2174, email: [15]rmehta@nsf.gov * Carole J. Read,ENG/EEC, telephone: (703) 292-2418, email: [16]cread@nsf.gov * Khershed Cooper, telephone: (703) 292-7017, email: [17]khcooper@nsf.gov Applicable Catalog of Federal Domestic Assistance (CFDA) Number(s): * 47.041 --- Engineering * 47.049 --- Mathematical and Physical Sciences Award Information Anticipated Type of Award: Standard Grant or Continuing Grant Estimated Number of Awards: 4 to 6 Anticipated Funding Amount: $5,000,000 pending the availability of funds Eligibility Information Organization Limit: Proposals may only be submitted by the following: * Universities and Colleges - Universities and two- and four-year colleges (including community colleges) accredited in, and having a campus located in the US, acting on behalf of their faculty members. Such organizations also are referred to as academic institutions. PI Limit: Principal Investigators must be at the faculty level or equivalent. Limit on Number of Proposals per Organization: 1 An academic institution - a university, or a campus in a multi-campus university -- may submit no more than one (1) proposal on which it is the lead organization in response to this solicitation. The same organization may be a collaborative partner in any number of other multi-organization group proposals in which it is not the lead. A proposal involving more than one organization must be submitted as a single proposal in which a single award is requested, with the managing principal investigator from the lead organization and subawards administered by the lead organization to any other participating organizations. Limit on Number of Proposals per PI: None Specified Proposal Preparation and Submission Instructions A. Proposal Preparation Instructions * Letters of Intent: Not Applicable * Preliminary Proposal Submission: Not Applicable * Full Proposals: + Full Proposals submitted via FastLane: NSF Proposal and Award Policies and Procedures Guide, Part I: Grant Proposal Guide (GPG) Guidelines apply. The complete text of the GPG is available electronically on the NSF website at: [18]http://www.nsf.gov/publications/pub_summ.jsp?ods_key=gpg. + Full Proposals submitted via Grants.gov: NSF Grants.gov Application Guide: A Guide for the Preparation and Submission of NSF Applications via Grants.gov Guidelines apply (Note: The NSF Grants.gov Application Guide is available on the Grants.gov website and on the NSF website at: [19]http://www.nsf.gov/publications/pub_summ.jsp?ods_key=gran tsgovguide) B. Budgetary Information * Cost Sharing Requirements: Inclusion of voluntary committed cost sharing is prohibited. * Indirect Cost (F&A) Limitations: Not Applicable * Other Budgetary Limitations: Not Applicable C. Due Dates * Full Proposal Deadline(s) (due by 5 p.m. proposer's local time): June 03, 2013 Proposal Review Information Criteria Merit Review Criteria: National Science Board approved criteria. Additional merit review considerations apply. Please see the full text of this solicitation for further information. Award Administration Information Award Conditions: Standard NSF award conditions apply. Reporting Requirements: Standard NSF reporting requirements apply. TABLE OF CONTENTS [20]Summary of Program Requirements I. [21]Introduction II. [22]Program Description III. [23]Award Information IV. [24]Eligibility Information V. [25]Proposal Preparation and Submission Instructions A. [26]Proposal Preparation Instructions B. [27]Budgetary Information C. [28]Due Dates D. [29]FastLane/Grants.gov Requirements VI. [30]NSF Proposal Processing and Review Procedures A. [31]Merit Review Principles and Criteria B. [32]Review and Selection Process VII. [33]Award Administration Information A. [34]Notification of the Award B. [35]Award Conditions C. [36]Reporting Requirements VIII. [37]Agency Contacts IX. [38]Other Information I. INTRODUCTION A length of one nanometer (one billionth of a meter) approximately defines both the minimum feature size of the smallest human-made devices and the largest dimension of the molecules from which living things are assembled. Nanoscale devices and systems are designed to have novel physical, chemical, and biological properties that derive from their intermediate scale, where transitional properties between molecular and bulk behaviors can be accessed and controlled. While many potentially technologically interesting nanostructures have been identified, these often have been produced using slow and expensive methods with little potential for economical production at commercial scale. Economical methods for the assembly of nanosystems, which have nanostructures and nanodevices as components, are also an element of the topic area. Nanosystems may be created by various synthesis and assembly techniques, including but not limited to combinations of molecular assembly and top-down miniaturization techniques, bio-assembly, networking at the nanoscale and multiscale and hierarchical architectures, robotics on surfaces, modular nanosystems, chemo-mechanical processing of molecular assemblies, and quantum interactions. Proposals to this topic area should target nanomanufacturing processes with a clear path to eventual commercial viability. We particularly seek proposals that include fundamental research in key, well-defined areas that are compellingly identified as roadblocks to scale-up. Both of these elements should be carefully explained and justified in proposals, since both the scientific novelty and the feasibility of the methods being researched will be important selection factors. Collaborative activities with industrial companies are strongly encouraged and collaborations in which industrial partners develop industrially-relevant test beds where university and company researchers can experiment and interact are particularly encouraged. Therefore, it is highly desirable that such firms be consulted early in the proposal preparation process and that their intellectual contributions are clearly explained in the proposal. II. PROGRAM DESCRIPTION This solicitation focuses on five high-risk/high-reward research and education themes, four focusing on nanomanufacturing and the fifth on societal issues associated with continuing advances in nanomanufacturing and the associated increasing use of nanoscale materials, devices and systems. All proposals, regardless of the theme or themes under which they are submitted, should clearly state what roadblocks to scale-up exist and what new approach or approaches will be investigated to overcome those obstacles. The scientific and technical barriers to commercialization, in terms of production rate, throughput, quality, reproducibility, and yield should be addressed in the proposal. * Novel Processes and Techniques for Continuous and Scalable Nanomanufacturing. Research on modeling, simulation, and bench-scale experimentation in support of the integration and scale-up of nanomanufacturing processes. Projects identifying specific technological roadblocks and proposing academic-industry research partnerships to overcome them are particularly encouraged. These may include research efforts inspired by promising fabrication approaches and tools recently demonstrated in industry or academia that likely have wider applicability. Examples of such areas include large area production, low-temperature solution-based processing, roll-to-roll processing and the reliable, high-speed, high-resolution on-line metrology, diagnostics, and adaptive (real-time) control capabilities and the process simulation and design methods needed in nanomanufacturing. * Directed Self-Assembly Processes for the High-Rate Production of Heterogeneous Nanostructures. Research on creating nanostructures that will self-assemble or can be easily assembled into large-scale nanosystems and systems of such nanosystems. It is anticipated that such systems will comprise discrete elements that are differentiable in composition, structure, dimension, and/or geometry. Processes producing heterogeneous nanostructures by conventional phase separation or multilayer deposition processes are not sought and will not usually meet this requirement. * Fundamental Scientific Research in Well-Defined Areas that are Compellingly Justified as Critical Roadblocks to Scale-Up. Key factors in the progression to large-scale nanomanufacturing involve infrastructure investment and standardization, development of metrology and quality monitoring methods, and the scale-up of both emergent and more well-established materials synthesis and processing methods. High production rate, throughput, quality, reproducibility and yield are all required for commercial viability. Some emerging fields of application appear to be particularly well suited for scale-up; however, the progression to commercial scale would be greatly enhanced by having partners with manufacturing expertise on the research team. In more established areas, researchers should clearly state what roadblocks to scale-up exist and what new approach or approaches will be investigated to overcome these obstacles. * Principles and Design Methods for Machines and Processes to Manufacture Nanoscale Structures, Devices and Systems. Research is encouraged on design principles, architectures and construction methods for nanoscale measurement and processing machines and systems, including their energy supply and control. Research in this area anticipates machines with integrated or stand-alone capabilities for the nanometer-scale resolution metrology of three-dimensional objects with 10-100 centimeter dimensions, new tools for sensing, assembling, processing, manipulating, manufacturing and integrating across length scales, new sensing modalities and algorithms for controlling and testing nanostructures and devices, and design automation tools for assembling systems of large numbers of heterogeneous nanocomponents. This research should be strongly grounded in fundamental understanding of nanoscale processes and should integrate novel concepts for measurement, high-rate synthesis and processing, scale integration, and scale-up of nanoscale synthesis and processing methods that derive from such understanding. * Societal, Environmental and Educational Implications of the Large-Scale Production and Use of Nanomaterials, Devices and Systems. Research proposals submitted in this area are expected to increase understanding, assessment and management of societal change associated with nanoscale science, engineering, and technology. Subjects for examination can include the educational, economic, environmental, social, organizational and ethical changes associated with support for, design of, and results from inventions and innovations in nanomanufacturing. These proposals can focus on any social, behavioral or environmental phenomena, alone or in combination, and should relate to the research emphases and findings. Thus, they should include experts in the relevant social, behavioral, economic and environmental sciences and nanoscale science and engineering. Proposers are encouraged to include enhancements to the relevant science infrastructure, and new or improved software, databases, instrumentation or tools are especially welcome. This theme aims at a long-term vision for addressing societal and ethical implications of nanotechnology with special reference to nanomanufacturing. Proposals that incorporate elements of more than one theme are welcome. Given NSF's strong focus on developing the infrastructure for nanoscale science and engineering, all proposals should address integration of research and education, including course development appropriate to the nature of the project. Collaborations between research universities and community colleges to provide curricula and research experiences to educate the future nanomanufacturing workforce are particularly encouraged. NSF does not normally support technical assistance, pilot plant efforts, research requiring security classification, or the development of products for commercial marketing or market research for a particular project or invention. Other research and education projects in nanoscale science and engineering will continue to be supported in the relevant programs divisions and directorates. Principal Investigators should ensure that their proposed project does not substantially overlap with ongoing federally-funded research. Proposals submitted in response to this solicitation may be shared by NSF with other federal agencies, including (but not limited to) the Department of Energy, National Institutes of Health, Environmental Protection Agency, Air Force Office of Scientific Research, Office of Naval Research, and the Intelligence Community. Reviews, including panel summaries, if applicable, may also be shared. The reasons for sharing these proposals and reviews include potential co-funding as well as avoiding duplication of federal funding for a particular research project. If the PI or awardee organization does not wish the proposal to be shared with a particular federal agency or agencies for funding purposes, they should provide a Single Copy Document with the proposal stating which federal funding agencies should be excluded. No explanations for exclusion are required. III. AWARD INFORMATION Anticipated Type of Award: Continuing Grant or Standard Grant. Estimated Number of Awards: 4-6. Awards will be in the range of $250,000-$375,000 per year for four years, depending on the scope of the work proposed. Grants may be awarded in a variety of sizes and durations. The total request for NSF funding for each project, for all investigators and all organizations, may not exceed $1,500,000. NSF expects to fund approximately 4-6 awards in FY 2013, depending on the quality of submissions and pending the availability of funds. Anticipated date of awards: September 2013. IV. ELIGIBILITY INFORMATION Organization Limit: Proposals may only be submitted by the following: * Universities and Colleges - Universities and two- and four-year colleges (including community colleges) accredited in, and having a campus located in the US, acting on behalf of their faculty members. Such organizations also are referred to as academic institutions. PI Limit: Principal Investigators must be at the faculty level or equivalent. Limit on Number of Proposals per Organization: 1 An academic institution - a university, or a campus in a multi-campus university -- may submit no more than one (1) proposal on which it is the lead organization in response to this solicitation. The same organization may be a collaborative partner in any number of other multi-organization group proposals in which it is not the lead. A proposal involving more than one organization must be submitted as a single proposal in which a single award is requested, with the managing principal investigator from the lead organization and subawards administered by the lead organization to any other participating organizations. Limit on Number of Proposals per PI: None Specified V. PROPOSAL PREPARATION AND SUBMISSION INSTRUCTIONS A. Proposal Preparation Instructions Full Proposal Preparation Instructions: Proposers may opt to submit proposals in response to this Program Solicitation via Grants.gov or via the NSF FastLane system. * Full proposals submitted via FastLane: Proposals submitted in response to this program solicitation should be prepared and submitted in accordance with the general guidelines contained in the NSF Grant Proposal Guide (GPG). The complete text of the GPG is available electronically on the NSF website at: [39]http://www.nsf.gov/publications/pub_summ.jsp?ods_key=gpg. Paper copies of the GPG may be obtained from the NSF Publications Clearinghouse, telephone (703) 292-7827 or by e-mail from [40]nsfpubs@nsf.gov. Proposers are reminded to identify this program solicitation number in the program solicitation block on the NSF Cover Sheet For Proposal to the National Science Foundation. Compliance with this requirement is critical to determining the relevant proposal processing guidelines. Failure to submit this information may delay processing. * Full proposals submitted via Grants.gov: Proposals submitted in response to this program solicitation via Grants.gov should be prepared and submitted in accordance with the NSF Grants.gov Application Guide: A Guide for the Preparation and Submission of NSF Applications via Grants.gov. The complete text of the NSF Grants.gov Application Guide is available on the Grants.gov website and on the NSF website at: ([41]http://www.nsf.gov/publications/pub_summ.jsp?ods_key=grantsgo vguide). To obtain copies of the Application Guide and Application Forms Package, click on the Apply tab on the Grants.gov site, then click on the Apply Step 1: Download a Grant Application Package and Application Instructions link and enter the funding opportunity number, (the program solicitation number without the NSF prefix) and press the Download Package button. Paper copies of the Grants.gov Application Guide also may be obtained from the NSF Publications Clearinghouse, telephone (703) 292-7827 or by e-mail from [42]nsfpubs@nsf.gov. Important Proposal Preparation Information: FastLane will check for required sections of the proposal, in accordance with Grant Proposal Guide (GPG) instructions described in [43]Chapter II.C.2. The GPG requires submission of: Project Summary; Project Description; References Cited; Biographical Sketch(es); Budget; Budget Justification; Current and Pending Support; Facilities, Equipment & Other Resources; Data Management Plan; and Postdoctoral Mentoring Plan, if applicable. If a required section is missing, FastLane will not accept the proposal. Please note that the proposal preparation instructions provided in this program solicitation may deviate from the GPG instructions. If the solicitation instructions do not require a GPG-required section to be included in the proposal, insert text or upload a document in that section of the proposal that states, "Not Applicable for this Program Solicitation." Doing so will enable FastLane to accept your proposal. The standard Grant Proposal Guide or NSF Grants.gov Application Guide instructions for proposal preparation apply, with the following modifications. Collaborative research activities should be described and submitted in a single proposal in which a single award is requested, with subawards administered by the lead organization to any other participating organizations (see [44]GPG section II.D.4.a.). This solicitation encourages team approaches. Budgets for any subawards to different organizations must be included. Cover Page: * FastLane Users: Proposers must identify this program solicitation number in the program announcement/solicitation block on the Cover Sheet and select "Scalable Nanomanufacturing" from the FastLane org. unit pull-down list. The project title must begin with "SNM:" * Grants.gov Users: The program solicitation number will be pre-populated by Grants.gov on the NSF Grant Application Cover Page. In Field 2, Unit of Consideration, enter 07030000 for the Division Code and 1674 for the Program Code. The project title must begin with "SNM:" Project Summary: Proposers must indicate in order of priority one (or more) of the five research and education themes described in Section II which the proposal addresses. This must be stated in the last line of the project summary, and it will be used to assist in assignment of the proposal to the most appropriate review panel. Project Description: The project description should include a discussion of the education and outreach aspects of the project and a management plan for coordinating project activities and attaining key project milestones. The proposal should describe the roles to be played by the participating organizations, the responsibilities of the managing PI, the activities of associated partners, and arrangements for the networking, exchange, and dissemination of data and the translation of results to organizations with experience in scale-up to commercial scale. The managing PI must be from the lead organization. Details on the education, training, and outreach activities planned as part of the project should be included. Opportunities for students to obtain novel research or educational experiences should be detailed, as well as any specific training activities or workshop. The project description is limited to 15 pages and proposals that exceed the page limitation will be returned without review. B. Budgetary Information Cost Sharing: Inclusion of voluntary committed cost sharing is prohibited Budget Preparation Instructions: PIs are required to attend the NSF Nanoscale Science and Engineering Grantees Meeting and make a poster or verbal presentation on the project. Budgets should include travel funds for PIs to attend this meeting in the second year and all subsequent years of the award. C. Due Dates * Full Proposal Deadline(s) (due by 5 p.m. proposer's local time): June 03, 2013 D. FastLane/Grants.gov Requirements * For Proposals Submitted Via FastLane: Detailed technical instructions regarding the technical aspects of preparation and submission via FastLane are available at: [45]https://www.fastlane.nsf.gov/a1/newstan.htm. For FastLane user support, call the FastLane Help Desk at 1-800-673-6188 or e-mail [46]fastlane@nsf.gov. The FastLane Help Desk answers general technical questions related to the use of the FastLane system. Specific questions related to this program solicitation should be referred to the NSF program staff contact(s) listed in Section VIII of this funding opportunity. Submission of Electronically Signed Cover Sheets. The Authorized Organizational Representative (AOR) must electronically sign the proposal Cover Sheet to submit the required proposal certifications (see Chapter II, Section C of the Grant Proposal Guide for a listing of the certifications). The AOR must provide the required electronic certifications within five working days following the electronic submission of the proposal. Further instructions regarding this process are available on the FastLane Website at: [47]https://www.fastlane.nsf.gov/fastlane.jsp. * For Proposals Submitted Via Grants.gov: Before using Grants.gov for the first time, each organization must register to create an institutional profile. Once registered, the applicant's organization can then apply for any federal grant on the Grants.gov website. Comprehensive information about using Grants.gov is available on the Grants.gov Applicant Resources webpage: [48]http://www07.grants.gov/applicants/app_help_reso.jsp. In addition, the NSF Grants.gov Application Guide provides additional technical guidance regarding preparation of proposals via Grants.gov. For Grants.gov user support, contact the Grants.gov Contact Center at 1-800-518-4726 or by email: [49]support@grants.gov. The Grants.gov Contact Center answers general technical questions related to the use of Grants.gov. Specific questions related to this program solicitation should be referred to the NSF program staff contact(s) listed in Section VIII of this solicitation. Submitting the Proposal: Once all documents have been completed, the Authorized Organizational Representative (AOR) must submit the application to Grants.gov and verify the desired funding opportunity and agency to which the application is submitted. The AOR must then sign and submit the application to Grants.gov. The completed application will be transferred to the NSF FastLane system for further processing. VI. NSF PROPOSAL PROCESSING AND REVIEW PROCEDURES Proposals received by NSF are assigned to the appropriate NSF program for acknowledgement and, if they meet NSF requirements, for review. All proposals are carefully reviewed by a scientist, engineer, or educator serving as an NSF Program Officer, and usually by three to ten other persons outside NSF either as ad hoc reviewers, panelists, or both, who are experts in the particular fields represented by the proposal. These reviewers are selected by Program Officers charged with oversight of the review process. Proposers are invited to suggest names of persons they believe are especially well qualified to review the proposal and/or persons they would prefer not review the proposal. These suggestions may serve as one source in the reviewer selection process at the Program Officer's discretion. Submission of such names, however, is optional. Care is taken to ensure that reviewers have no conflicts of interest with the proposal. In addition, Program Officers may obtain comments from site visits before recommending final action on proposals. Senior NSF staff further review recommendations for awards. A flowchart that depicts the entire NSF proposal and award process (and associated timeline) is included in the GPG as [50]Exhibit III-1. A comprehensive description of the Foundation's merit review process is available on the NSF website at: [51]http://nsf.gov/bfa/dias/policy/merit_review/. Proposers should also be aware of core strategies that are essential to the fulfillment of NSF's mission, as articulated in [52]Empowering the Nation Through Discovery and Innovation: NSF Strategic Plan for Fiscal Years (FY) 2011-2016. These strategies are integrated in the program planning and implementation process, of which proposal review is one part. NSF's mission is particularly well-implemented through the integration of research and education and broadening participation in NSF programs, projects, and activities. One of the core strategies in support of NSF's mission is to foster integration of research and education through the programs, projects and activities it supports at academic and research institutions. These institutions provide abundant opportunities where individuals may concurrently assume responsibilities as researchers, educators, and students, and where all can engage in joint efforts that infuse education with the excitement of discovery and enrich research through the variety of learning perspectives. Another core strategy in support of NSF's mission is broadening opportunities and expanding participation of groups, institutions, and geographic regions that are underrepresented in STEM disciplines, which is essential to the health and vitality of science and engineering. NSF is committed to this principle of diversity and deems it central to the programs, projects, and activities it considers and supports. A. Merit Review Principles and Criteria The National Science Foundation strives to invest in a robust and diverse portfolio of projects that creates new knowledge and enables breakthroughs in understanding across all areas of science and engineering research and education. To identify which projects to support, NSF relies on a merit review process that incorporates consideration of both the technical aspects of a proposed project and its potential to contribute more broadly to advancing NSF's mission "to promote the progress of science; to advance the national health, prosperity, and welfare; to secure the national defense; and for other purposes." NSF makes every effort to conduct a fair, competitive, transparent merit review process for the selection of projects. 1. Merit Review Principles These principles are to be given due diligence by PIs and organizations when preparing proposals and managing projects, by reviewers when reading and evaluating proposals, and by NSF program staff when determining whether or not to recommend proposals for funding and while overseeing awards. Given that NSF is the primary federal agency charged with nurturing and supporting excellence in basic research and education, the following three principles apply: * All NSF projects should be of the highest quality and have the potential to advance, if not transform, the frontiers of knowledge. * NSF projects, in the aggregate, should contribute more broadly to achieving societal goals. These "Broader Impacts" may be accomplished through the research itself, through activities that are directly related to specific research projects, or through activities that are supported by, but are complementary to, the project. The project activities may be based on previously established and/or innovative methods and approaches, but in either case must be well justified. * Meaningful assessment and evaluation of NSF funded projects should be based on appropriate metrics, keeping in mind the likely correlation between the effect of broader impacts and the resources provided to implement projects. If the size of the activity is limited, evaluation of that activity in isolation is not likely to be meaningful. Thus, assessing the effectiveness of these activities may best be done at a higher, more aggregated, level than the individual project. With respect to the third principle, even if assessment of Broader Impacts outcomes for particular projects is done at an aggregated level, PIs are expected to be accountable for carrying out the activities described in the funded project. Thus, individual projects should include clearly stated goals, specific descriptions of the activities that the PI intends to do, and a plan in place to document the outputs of those activities. These three merit review principles provide the basis for the merit review criteria, as well as a context within which the users of the criteria can better understand their intent. 2. Merit Review Criteria All NSF proposals are evaluated through use of the two National Science Board approved merit review criteria. In some instances, however, NSF will employ additional criteria as required to highlight the specific objectives of certain programs and activities. The two merit review criteria are listed below. Both criteria are to be given full consideration during the review and decision-making processes; each criterion is necessary but neither, by itself, is sufficient. Therefore, proposers must fully address both criteria. ([53]GPG Chapter II.C.2.d.i. contains additional information for use by proposers in development of the Project Description section of the proposal.) Reviewers are strongly encouraged to review the criteria, including [54]GPG Chapter II.C.2.d.i., prior to the review of a proposal. When evaluating NSF proposals, reviewers will be asked to consider what the proposers want to do, why they want to do it, how they plan to do it, how they will know if they succeed, and what benefits could accrue if the project is successful. These issues apply both to the technical aspects of the proposal and the way in which the project may make broader contributions. To that end, reviewers will be asked to evaluate all proposals against two criteria: * Intellectual Merit: The Intellectual Merit criterion encompasses the potential to advance knowledge; and * Broader Impacts: The Broader Impacts criterion encompasses the potential to benefit society and contribute to the achievement of specific, desired societal outcomes. The following elements should be considered in the review for both criteria: 1. What is the potential for the proposed activity to a. Advance knowledge and understanding within its own field or across different fields (Intellectual Merit); and b. Benefit society or advance desired societal outcomes (Broader Impacts)? 2. To what extent do the proposed activities suggest and explore creative, original, or potentially transformative concepts? 3. Is the plan for carrying out the proposed activities well-reasoned, well-organized, and based on a sound rationale? Does the plan incorporate a mechanism to assess success? 4. How well qualified is the individual, team, or organization to conduct the proposed activities? 5. Are there adequate resources available to the PI (either at the home organization or through collaborations) to carry out the proposed activities? Broader impacts may be accomplished through the research itself, through the activities that are directly related to specific research projects, or through activities that are supported by, but are complementary to, the project. NSF values the advancement of scientific knowledge and activities that contribute to achievement of societally relevant outcomes. Such outcomes include, but are not limited to: full participation of women, persons with disabilities, and underrepresented minorities in science, technology, engineering, and mathematics (STEM); improved STEM education and educator development at any level; increased public scientific literacy and public engagement with science and technology; improved well-being of individuals in society; development of a diverse, globally competitive STEM workforce; increased partnerships between academia, industry, and others; improved national security; increased economic competitiveness of the United States; and enhanced infrastructure for research and education. Proposers are reminded that reviewers will also be asked to review the Data Management Plan and the Postdoctoral Researcher Mentoring Plan, as appropriate. Additional Solicitation Specific Review Criteria In addition, the following criteria will be used: * Potential for significant contributions to the advancement of nanomanufacturing in one or more of the five research and education themes: + Novel processes and techniques for continuous and scalable nanomanufacturing; + Directed (physical/chemical/biological) self-assembly processes leading to heterogeneous nanostructures with the potential for high-rate production; + Principles and design methods to produce machines and processes to manufacture nanoscale structures, devices and systems; + Fundamental scientific research in well-defined areas that are compellingly justified as critical roadblocks to scale-up; and/or + Societal, environmental and educational implications of the large-scale production and use of nanomaterials, devices and systems, including the life-cycle analysis of such nanomaterials, devices and systems; * Degree of interdisciplinarity; * Value to nanomanufacturing education; * Strength of planned collaborations and appropriateness and likely effectiveness of those collaborations. Proposals will be evaluated on the quality of the collaborations, not on the number of collaborators; and * Likely effectiveness of the management plan. B. Review and Selection Process Proposals submitted in response to this program solicitation will be reviewed by Ad hoc Review and/or Panel Review. Reviewers will be asked to formulate a recommendation to either support or decline each proposal. The Program Officer assigned to manage the proposal's review will consider the advice of reviewers and will formulate a recommendation. After scientific, technical and programmatic review and consideration of appropriate factors, the NSF Program Officer recommends to the cognizant Division Director whether the proposal should be declined or recommended for award. NSF is striving to be able to tell applicants whether their proposals have been declined or recommended for funding within six months. The time interval begins on the deadline or target date, or receipt date, whichever is later. The interval ends when the Division Director accepts the Program Officer's recommendation. A summary rating and accompanying narrative will be completed and submitted by each reviewer. In all cases, reviews are treated as confidential documents. Verbatim copies of reviews, excluding the names of the reviewers, are sent to the Principal Investigator/Project Director by the Program Officer. In addition, the proposer will receive an explanation of the decision to award or decline funding. In all cases, after programmatic approval has been obtained, the proposals recommended for funding will be forwarded to the Division of Grants and Agreements for review of business, financial, and policy implications and the processing and issuance of a grant or other agreement. Proposers are cautioned that only a Grants and Agreements Officer may make commitments, obligations or awards on behalf of NSF or authorize the expenditure of funds. No commitment on the part of NSF should be inferred from technical or budgetary discussions with a NSF Program Officer. A Principal Investigator or organization that makes financial or personnel commitments in the absence of a grant or cooperative agreement signed by the NSF Grants and Agreements Officer does so at their own risk. VII. AWARD ADMINISTRATION INFORMATION A. Notification of the Award Notification of the award is made to the submitting organization by a Grants Officer in the Division of Grants and Agreements. Organizations whose proposals are declined will be advised as promptly as possible by the cognizant NSF Program administering the program. Verbatim copies of reviews, not including the identity of the reviewer, will be provided automatically to the Principal Investigator. (See Section VI.B. for additional information on the review process.) B. Award Conditions An NSF award consists of: (1) the award letter, which includes any special provisions applicable to the award and any numbered amendments thereto; (2) the budget, which indicates the amounts, by categories of expense, on which NSF has based its support (or otherwise communicates any specific approvals or disapprovals of proposed expenditures); (3) the proposal referenced in the award letter; (4) the applicable award conditions, such as Grant General Conditions (GC-1); * or Research Terms and Conditions * and (5) any announcement or other NSF issuance that may be incorporated by reference in the award letter. Cooperative agreements also are administered in accordance with NSF Cooperative Agreement Financial and Administrative Terms and Conditions (CA-FATC) and the applicable Programmatic Terms and Conditions. NSF awards are electronically signed by an NSF Grants and Agreements Officer and transmitted electronically to the organization via e-mail. *These documents may be accessed electronically on NSF's Website at [55]http://www.nsf.gov/awards/managing/award_conditions.jsp?org=NSF. Paper copies may be obtained from the NSF Publications Clearinghouse, telephone (703) 292-7827 or by e-mail from [56]nsfpubs@nsf.gov. More comprehensive information on NSF Award Conditions and other important information on the administration of NSF awards is contained in the NSF Award & Administration Guide (AAG) Chapter II, available electronically on the NSF Website at [57]http://www.nsf.gov/publications/pub_summ.jsp?ods_key=aag. C. Reporting Requirements For all multi-year grants (including both standard and continuing grants), the Principal Investigator must submit an annual project report to the cognizant Program Officer at least 90 days prior to the end of the current budget period. (Some programs or awards require submission of more frequent project reports). Within 90 days following expiration of a grant, the PI also is required to submit a final project report, and a project outcomes report for the general public. Failure to provide the required annual or final project reports, or the project outcomes report, will delay NSF review and processing of any future funding increments as well as any pending proposals for all identified PIs and co-PIs on a given award. PIs should examine the formats of the required reports in advance to assure availability of required data. PIs are required to use NSF's electronic project-reporting system, available through Research.gov, for preparation and submission of annual and final project reports. Such reports provide information on accomplishments, project participants (individual and organizational), publications, and other specific products and impacts of the project. Submission of the report via Research.gov constitutes certification by the PI that the contents of the report are accurate and complete. The project outcomes report also must be prepared and submitted using Research.gov. This report serves as a brief summary, prepared specifically for the public, of the nature and outcomes of the project. This report will be posted on the NSF website exactly as it is submitted by the PI. More comprehensive information on NSF Reporting Requirements and other important information on the administration of NSF awards is contained in the NSF Award & Administration Guide (AAG) Chapter II, available electronically on the NSF Website at [58]http://www.nsf.gov/publications/pub_summ.jsp?ods_key=aag. VIII. AGENCY CONTACTS Please note that the program contact information is current at the time of publishing. See program website for any updates to the points of contact. General inquiries regarding this program should be made to: * Sumanta Acharya, ENG/CBET, telephone: (703) 292-7494, email: [59]sacharya@nsf.gov * Anupama B. Kaul, ENG/ECCS, telephone: (703) 292-8153, email: [60]akaul@nsf.gov * Bruce M. Kramer, ENG/CMMI, telephone: (703) 292-5348, email: [61]bkramer@nsf.gov * Lynnette D. Madsen, MPS/DMR, telephone: (703) 292-4936, email: [62]lmadsen@nsf.gov * Rajesh Mehta, ENG/IIP, telephone: (703) 292-2174, email: [63]rmehta@nsf.gov * Carole J. Read, ENG/EEC, telephone: (703) 292-2418, email: [64]cread@nsf.gov * Khershed Cooper, telephone: (703) 292-7017, email: [65]khcooper@nsf.gov For questions related to the use of FastLane, contact: * FastLane Help Desk, telephone: 1-800-673-6188; e-mail: [66]fastlane@nsf.gov. For questions relating to Grants.gov contact: * Grants.gov Contact Center: If the Authorized Organizational Representatives (AOR) has not received a confirmation message from Grants.gov within 48 hours of submission of application, please contact via telephone: 1-800-518-4726; e-mail: [67]support@grants.gov. For questions related to the use of FastLane, contact: * telephone: 1-800-673-6188, email: [68]fastlane@nsf.gov IX. OTHER INFORMATION The NSF website provides the most comprehensive source of information on NSF Directorates (including contact information), programs and funding opportunities. Use of this website by potential proposers is strongly encouraged. In addition, "My NSF" is an information-delivery system designed to keep potential proposers and other interested parties apprised of new NSF funding opportunities and publications, important changes in proposal and award policies and procedures, and upcoming NSF [69]Grants Conferences. Subscribers are informed through e-mail or the user's Web browser each time new publications are issued that match their identified interests. "My NSF" also is available on NSF's website at [70]http://www.nsf.gov/mynsf/. Grants.gov provides an additional electronic capability to search for Federal government-wide grant opportunities. NSF funding opportunities may be accessed via this new mechanism. Further information on Grants.gov may be obtained at [71]http://www.grants.gov. Grant Opportunities for Academic Liasion with Industry (GOALI), NSF 12-513) [72]http://www.nsf.gov/pubs/2012/nsf12513/nsf12513.htm. Grant Opportunities for Academic Liaison with Industry (GOALI) aims to synergize university-industry partnerships by making funds available to support an eclectic mix of industry-university linkages. Special interest is focused on affording the opportunity for: * interdisciplinary university-industry teams to conduct long-term research projects; * Faculty, postdoctoral fellows, and students to conduct research and gain experience with production processes in an industrial setting; and * Industrial scientists and engineers to bring industry's perspective and integrative skills to academe. This solicitation, previous program solicitations, and additional information concerning related activities such as workshops and publications, including "The National Nanotechnology Initiative - Supplement to the President's FY 2013 Budget (2012)" prepared by the National Science and Technology Council, are available on-line at [73]http://www.nsf.gov/nano and [74]http://nano.gov/. To accelerate nanotechnology development in support of the President's priorities and innovation strategy, in accordance with the recommendations of the President's Council of Advisors on Science and technology (PCAST), NNI member agencies have identified areas ripe for significant advances through close and targeted program-level interagency collaboration. The resulting Nanotechnology Signature Initiatives include "Sustainable Nanomanufacturing," "Nanoelectronics for 2020 and Beyond," and "Nanotechnology for Solar Energy Collection and Conversion." All three publications are available at [75](http://www.nano.gov/html/research/signature_initiatives.html). This program solicitation is a partial contribution to those two NNI, National Science and Technology Council, initiatives. The PCAST report, "The National Nanotechnology Initiative 2010: Third Assessment and Recommendations of the National Nanotechnology Advisory Panel," is available at [76]http://www.whitehouse.gov/sites/default/files/microsites/ostp/p cast-nano-report.pdf. ABOUT THE NATIONAL SCIENCE FOUNDATION The National Science Foundation (NSF) is an independent Federal agency created by the National Science Foundation Act of 1950, as amended (42 USC 1861-75). The Act states the purpose of the NSF is "to promote the progress of science; [and] to advance the national health, prosperity, and welfare by supporting research and education in all fields of science and engineering." NSF funds research and education in most fields of science and engineering. It does this through grants and cooperative agreements to more than 2,000 colleges, universities, K-12 school systems, businesses, informal science organizations and other research organizations throughout the US. The Foundation accounts for about one-fourth of Federal support to academic institutions for basic research. NSF receives approximately 55,000 proposals each year for research, education and training projects, of which approximately 11,000 are funded. In addition, the Foundation receives several thousand applications for graduate and postdoctoral fellowships. The agency operates no laboratories itself but does support National Research Centers, user facilities, certain oceanographic vessels and Arctic and Antarctic research stations. The Foundation also supports cooperative research between universities and industry, US participation in international scientific and engineering efforts, and educational activities at every academic level. Facilitation Awards for Scientists and Engineers with Disabilities provide funding for special assistance or equipment to enable persons with disabilities to work on NSF-supported projects. See Grant Proposal Guide Chapter II, Section D.2for instructions regarding preparation of these types of proposals. The National Science Foundation has Telephonic Device for the Deaf (TDD) and Federal Information Relay Service (FIRS) capabilities that enable individuals with hearing impairments to communicate with the Foundation about NSF programs, employment or general information. TDD may be accessed at (703) 292-5090 and (800) 281-8749, FIRS at (800) 877-8339. The National Science Foundation Information Center may be reached at (703) 292-5111. The National Science Foundation promotes and advances scientific progress in the United States by competitively awarding grants and cooperative agreements for research and education in the sciences, mathematics, and engineering. To get the latest information about program deadlines, to download copies of NSF publications, and to access abstracts of awards, visit the NSF Website at [77]http://www.nsf.gov * Location: 4201 Wilson Blvd. Arlington, VA 22230 * For General Information (NSF Information Center): (703) 292-5111 * TDD (for the hearing-impaired): (703) 292-5090 * To Order Publications or Forms: Send an e-mail to: [78]nsfpubs@nsf.gov or telephone: (703) 292-7827 * To Locate NSF Employees: (703) 292-5111 PRIVACY ACT AND PUBLIC BURDEN STATEMENTS The information requested on proposal forms and project reports is solicited under the authority of the National Science Foundation Act of 1950, as amended. The information on proposal forms will be used in connection with the selection of qualified proposals; and project reports submitted by awardees will be used for program evaluation and reporting within the Executive Branch and to Congress. The information requested may be disclosed to qualified reviewers and staff assistants as part of the proposal review process; to proposer institutions/grantees to provide or obtain data regarding the proposal review process, award decisions, or the administration of awards; to government contractors, experts, volunteers and researchers and educators as necessary to complete assigned work; to other government agencies or other entities needing information regarding applicants or nominees as part of a joint application review process, or in order to coordinate programs or policy; and to another Federal agency, court, or party in a court or Federal administrative proceeding if the government is a party. Information about Principal Investigators may be added to the Reviewer file and used to select potential candidates to serve as peer reviewers or advisory committee members. See Systems of Records, [79]NSF-50, "Principal Investigator/Proposal File and Associated Records," 69 Federal Register 26410 (May 12, 2004), and [80]NSF-51, "Reviewer/Proposal File and Associated Records," 69 Federal Register 26410 (May 12, 2004). Submission of the information is voluntary. Failure to provide full and complete information, however, may reduce the possibility of receiving an award. An agency may not conduct or sponsor, and a person is not required to respond to, an information collection unless it displays a valid Office of Management and Budget (OMB) control number. The OMB control number for this collection is 3145-0058. Public reporting burden for this collection of information is estimated to average 120 hours per response, including the time for reviewing instructions. Send comments regarding the burden estimate and any other aspect of this collection of information, including suggestions for reducing this burden, to: Suzanne H. Plimpton Reports Clearance Officer Division of Administrative Services National Science Foundation Arlington, VA 22230 [81]Policies and Important Links | [82]Privacy | [83]FOIA | [84]Help | [85]Contact NSF | [86]Contact Web Master | [87]SiteMap National Science Foundation The National Science Foundation, 4201 Wilson Boulevard, Arlington, Virginia 22230, USA Tel: (703) 292-5111, FIRS: (800) 877-8339 | TDD: (800) 281-8749 Last Updated: 11/07/06 [88]Text Only [x.gif] References 1. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#toc 2. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=nsf13001 3. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=nsf13001 4. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=nsf13001 5. http://www.nsf.gov/nsb/publications/2011/meritreviewcriteria.pdf 6. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/gpg_sigchanges.jsp 7. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/aag_sigchanges.jsp 8. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/gpg_index.jsp 9. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/gpg_2.jsp#IID4a 10. http://www.nano.gov/node/611 11. mailto:sacharya@nsf.gov 12. mailto:akaul@nsf.gov 13. mailto:bkramer@nsf.gov 14. mailto:lmadsen@nsf.gov 15. mailto:rmehta@nsf.gov 16. mailto:cread@nsf.gov 17. mailto:khcooper@nsf.gov 18. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=gpg 19. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=grantsgovguide 20. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#summary 21. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#pgm_intr_txt 22. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#pgm_desc_txt 23. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#awd_info 24. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#elig 25. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#prep 26. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#prep 27. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#budg_cst_shr_txt 28. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#dates 29. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#fastlane 30. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#review 31. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#reviewcrit 32. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#reviewprot 33. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#awardadmin 34. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#awardnotify 35. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#grantcond 36. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#reportreq 37. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#cont 38. http://www.nsf.gov/pubs/2013/nsf13545/nsf13545.htm#othpgm 39. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=gpg 40. mailto:nsfpubs@nsf.gov 41. http://www.nsf.gov/publications/ pub_summ.jsp?ods_key=grantsgovguide 42. mailto:nsfpubs@nsf.gov 43. http://www.nsf.gov/pubs/policydocs/ pappguide/nsf13001/gpg_2.jsp#IIC2 44. http://www.nsf.gov/pubs/policydocs/ pappguide/nsf13001/gpg_2.jsp#IID24a 45. https://www.fastlane.nsf.gov/a1/newstan.htm 46. mailto:fastlane@nsf.gov 47. https://www.fastlane.nsf.gov/fastlane.jsp 48. http://www07.grants.gov/applicants/app_help_reso.jsp 49. mailto:support@grants.gov 50. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/gpg_3ex1.pdf 51. http://nsf.gov/bfa/dias/policy/merit_review/ 52. http://www.nsf.gov/news/strategicplan/nsfstrategicplan_2011_2016.pdf 53. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/gpg_2.jsp#IIC2di 54. http://www.nsf.gov/pubs/policydocs/pappguide/nsf13001/gpg_2.jsp#IIC2di 55. http://www.nsf.gov/awards/managing/award_conditions.jsp?org=NSF 56. mailto:nsfpubs@nsf.gov 57. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=aag 58. http://www.nsf.gov/publications/pub_summ.jsp?ods_key=aag 59. mailto:sacharya@nsf.gov 60. mailto:akaul@nsf.gov 61. mailto:bkramer@nsf.gov 62. mailto:lmadsen@nsf.gov 63. mailto:rmehta@nsf.gov 64. mailto:cread@nsf.gov 65. mailto:khcooper@nsf.gov 66. mailto:fastlane@nsf.gov 67. mailto:support@grants.gov 68. mailto:fastlane@nsf.gov 69. http://www.nsf.gov/bfa/dias/policy/outreach.jsp 70. http://www.nsf.gov/mynsf/ 71. http://www.grants.gov/ 72. http://www.nsf.gov/pubs/2012/nsf12513/nsf12513.htm 73. http://www.nsf.gov/nano 74. http://nano.gov/ 75. http://www.nano.gov/html/research/signature_initiatives.html 76. http://www.whitehouse.gov/sites/ default/files/microsites/ostp/pcast-nano-report.pdf 77. http://www.nsf.gov/ 78. mailto:nsfpubs@nsf.gov 79. http://www.nsf.gov/policies/ SOR_PA_NSF-50_Principal_Investigator_Proposal_File.pdf 80. http://www.nsf.gov/policies/ SOR_PA_NSF-51_Reviewer_Proposal_File.pdf 81. http://www.nsf.gov/policies 82. http://www.nsf.gov/policies/privacy.jsp 83. http://www.nsf.gov/policies/foia.jsp 84. http://www.nsf.gov/help/ 85. http://www.nsf.gov/help/contact.jsp 86. mailto:webmaster@nsf.gov 87. http://www.nsf.gov/help/sitemap.jsp 88. http://transcoder.usablenet.com/tt/referrer